Custom Wrought Iron Gates & Railings

Monarch has been hand-forging wrought iron for over 20 years. Every gate, balcony railing and stair railing is built to order and sized to your opening, run or stairwell.

Railings are built to code, at 36 inches for residential guards and 42 for commercial, with baluster spacing under the 4-inch sphere rule.

Powder-coated finishes, ornate scrollwork or clean modern lines. Made to order and shipped throughout the US and Canada.

A driveway gate has to do two jobs at once: control who gets in, and hold up to being opened several times a day for twenty years without sagging.

Monarch gates are hand-forged and sized to your opening, single swing, double swing or slide. Every one is built for automation, so an opener and safety sensors can be added at install.

Gothic arches, estate scrollwork, spearhead tops, privacy panels, or clean geometric modern. Powder-coated finishes throughout.

View All Wrought Iron Gates     Request A Free Quote

A balcony railing is a guard, which means it has to meet code before it can look like anything. Ours are built to 36 inches minimum for residential guards, with baluster spacing tight enough that a 4-inch sphere will not pass through.

Straight runs, bowed fronts and full curves, all measured to your opening. Juliet balconies for full-height windows and doors where there is no floor to stand on.

Mediterranean, Roman, floral scroll or clean modern. Powder-coated and rated for exterior exposure.

View All Balcony Railings     Request A Free Quote

Railings split into two jobs. A stair railing has to be graspable and follow the pitch of the treads, at 34 to 38 inches above the nosing. A fence railing has to hold a line, stay plumb over uneven ground, and meet guard height where there’s a drop behind it.

Monarch builds both from your measurements. Straight runs, curved, or double curved staircases where every baluster sits at a different angle.

Ornate scrollwork, floral patterns, spear tops, glass panel accents or plain balusters. Interior and exterior.

View All Railings     Request A Free Quote

FAQ

Yes. Every piece is built from your measurements rather than cut down from stock sizes. Choose scrollwork patterns, spear or scroll tops, panel infills, monograms, or plain balusters, and we can work from a sketch or a photo of something you’ve seen elsewhere.

A Juliet balcony is a decorative wrought iron railing installed in front of a full-height window or door, offering style and safety without extending the floor space.

Every piece is powder-coated over prepared steel, which seals the surface against moisture. That coating is what prevents rust, and it holds up in coastal and freeze-thaw climates. Touch-up paint is supplied so any chips from installation or impact can be sealed before they spread.

Yes. Monarch gates are built to accept automation, with hinges and framing sized for the extra load an operator puts on them. Swing gates typically use an arm or underground operator, and slide gates run on a track with a rack-driven motor.

The automation hardware itself, including the operator, safety sensors, keypad and intercom, is supplied and wired by your gate installer or a low-voltage contractor. Tell us at quote stage that the gate will be automated so we build the hinge side and frame accordingly.

Guard railings on balconies and landings are typically 36 inches minimum for residential and 42 for commercial. Graspable stair handrails sit at 34 to 38 inches above the tread nosing. Baluster spacing has to be tight enough that a 4-inch sphere cannot pass through. Local codes vary, so we confirm requirements for your jurisdiction before fabrication.

Definitely. Monarch Custom Doors can coordinate wrought iron finishes, scrollwork, and color tones across your doors, windows, and railings for a cohesive luxury look.

A balcony railing guards a real balcony, meaning there is floor space behind it that people stand on. It has to meet guard height requirements, usually 36 inches residential.

A Juliet balcony has no floor at all. It is a railing mounted across the outside of a full-height window or a door opening, so the window can open fully without anyone stepping out. The ironwork does the same safety job, but it attaches to the wall or window frame rather than to a deck.

Juliet balconies cost less and need no structural balcony beneath them, which is why they show up on renovations where adding a real balcony is not practical.

Contact Us Now

It's Never Too Early To Begin

Whether you choose one of our custom, hand-forged door designs, or send us a design you found elsewhere, our master artisan will make sure your door is unmatched in beauty, and will be admired by all who enter through it.

Inquiry Form

  • This field is for validation purposes and should be left unchanged.

 

Monarch Custom Doors

www.monarchcustomdoors.com

                             Prefer To Talk? CALL US at: 888-799-4755