Monarch Custom Doors builds the finest 12-gauge wrought iron doors at the most competitive prices in the industry, hand-forged from sheet metal measured at .1046 inches thick and 4.267 lbs per square foot, the gauge standard that balances strength with weight so doors stay durable without becoming difficult to open. Every door ships with heavy-duty ball-bearing barrel hinges rated to hold 1,000 lbs each.
Whether you’re shopping for a single or double wrought iron front door, a custom exterior door, or a full entryway upgrade, our hand-forged designs bring a luxury look to any home while standing up to daily use for decades. Browse our wrought iron doors for sale below, or work with our team on a fully custom design.
Our wrought iron doors are available with an upgrade to Swiss-patented thermal barrier technology, engineered to resist heat and cold transfer for homes in extreme climates, plus impact glass, security glass, and a hurricane package for coastal properties.
| Common Door | Monarch Thermal Barrier Door | |
|---|---|---|
| U-Value | .41 | .27 (52% better) |
| R-Value | 2.44 | 3.70 (52% better) |
Every Monarch wrought iron door is built on a heavy-duty frame with tamper-resistant hinges and advanced locking mechanisms designed to resist forced entry. Doors undergo a multi-step anti-corrosion process, galvanized and powder-coated, so they hold up in coastal, humid, and high-traffic environments with minimal upkeep. Our barrel hinges are each rated to hold 1,000 lbs, keeping heavy 12-gauge doors easy to open despite their weight.
Wrought iron doors are low-maintenance by design. Unlike wood, they won’t warp or crack over time. We recommend wiping the surface down with a damp cloth and mild soap, with a light coat of protective wax once or twice a year to preserve the finish and prevent oxidation.
Most custom wrought iron doors are completed within 16–17 weeks of order confirmation, depending on design complexity and destination. Whether you’re ordering a single door for a residential entry or outfitting a commercial project with dozens of units, our team works directly with architects, builders, and contractors on bulk and phased orders.
Monarch uses 12-gauge wrought iron, sheet metal .1046 inches thick, weighing 4.267 lbs per square foot. In gauge measurements, a smaller number means thicker, stronger metal. 12-gauge is the industry standard for the best balance of strength and weight, making doors durable without being too heavy to open comfortably.
Yes. Standard wrought iron doors carry a U-value of about .41, which fails building code in many districts (compliant doors must be under U.32). Monarch’s Swiss-patented thermal barrier technology brings that down to a U-value of .27, 52% better than a common door, with an R-value of 3.70 versus the typical 2.44. This upgrade is especially recommended for homes in extreme climates and can be paired with energy-efficient glass for additional performance.
Monarch’s thermal barrier wrought iron doors have a U-value of .27 and an R-value of 3.70, compared to a common door’s U-value of .41 and R-value of 2.44, a 52% improvement on both measures. Lower U-values and higher R-values both indicate better insulation.
Wrought iron doors are inherently resistant to forced entry due to the thickness and strength of 12-gauge iron. Monarch doors feature heavy-duty frames, tamper-resistant hinges, and advanced locking mechanisms for added protection. Customers who need bullet-resistant protection can also explore our Bulletproof Security Doors.
Most custom wrought iron doors are completed within 16–17 weeks of order confirmation. Timelines vary based on design complexity, customizations, and shipping destination, our team provides a clear estimate during the ordering process.
Yes. Whether you need one door or 500, we work directly with architects, builders, and contractors on both single custom orders and larger bulk or phased projects.
Very little. Our doors are galvanized and powder-coated through a multi-step anti-corrosion process, so they resist rust even in coastal or humid climates. Periodic cleaning with a damp cloth and mild soap, plus a protective wax coat once or twice a year, is all that’s needed to maintain the finish.
Absolutely. Every wrought iron door is fully customizable, choose from our existing patterns or send your own design (CAD or hand sketch). You can select the size, glass type (clear, frosted, rain, or decorative, including French-style divided glass panels), and finish, from classic matte black and oil-rubbed bronze to custom patinas.
Single wrought iron doors work well for standard entryways and are the most cost-effective option, while double wrought iron front doors create a wider, more dramatic entrance and are popular for larger homes and formal facades. Both are available in the same 12-gauge construction, thermal barrier upgrade, and finish options. Browse our double wrought iron doors or single wrought iron doors to compare styles.
Member National Association of Home Builders (NAHB)